Infill drilling underway on Honeymoon satellite deposits
Released
Released
Announcement PDF
ASX Release 5 July 2023
Honeymoon Uranium Project, South Australia
Infill drilling underway on satellite deposits
to grow mine life and production rate
Expanded inventory will enable Boss to leverage existing infrastructure, take
advantage of greater scale and increase free cashflow
Boss Energy Limited (ASX: BOE; OTCQB: BQSSF) is pleased to announce the start of an infill drilling program
targeting the Gould’s Dam and Jason’s satellite deposits at Honeymoon.
The program aimed at upgrading the resources at both deposits while improving the geological and
hydrogeological understanding of the uranium mineralisation.
Boss Managing Director Duncan Craib said: “These satellite deposits have the potential to expand
Honeymoon’s production profile and extend the current mine life.
“Increases in the forecast production rate were not considered as part of the current Honeymoon restart
feasibility studies. But given the strong outlook for the uranium market, we want to unlock the substantial
value which would result from increasing the inventory and production rate”.
Honeymoon is on track for first production in the December quarter, 2023. The mine is increasing the
production profile to 2.45 Mlb/annum over a plus-10 year mine life but this is based on just a portion of the
existing Resource. In addition to the Resource, there is a substantial Exploration Target (details of Resource
and Exploration Target are below).
Satellite deposits
Boss recently completed detailed geological modelling and planning for resource upgrade drilling on
Gould’s Dam and Jasons deposits. These studies highlighted the opportunity to grow and upgrade the
satellite JORC resources.
It is envisaged that these new target areas will form the basis of a study to assess and define an increase in
the forecast production rate to more than 3Mlb/annum U308 equivalent or an extension of mine life.
All drill holes will be logged with a Borehole Magnetic Resonance tool, Fission Neutron tools, and other
lithological tools such as neutron porosity and formation density.
FOR FURTHER INFORMATION PLEASE CONTACT:
Boss Energy Limited
ABN 38 116 834 336
Duncan Craib - Managing Director/ CEO
+61 (08) 6263 4494
ASX: BOE
OTCQX: BQSSF
Level 1, 420 Hay Street, Subiaco
Western Australia 6008
Paul Armstrong – Public Relations
+61 (08) 9388 1474
www.bossenergy.com
@Boss_Energy
Table 1: Summary of Mineral Resource for satellite deposits of Gould’s Dam and Jason’s
Resource
Classification
Tonnage
(Million Tonnes)
Average Grade
(ppm U3O8)
Contained Metal
(Kt, U3O8)
Contained Metal
(Mlb, U3O8)
4.9
10.7
Jason’s (March 2017) 1
Inferred
6.2
790
Gould’s Dam (April 2016) 2
Indicated
4.4
650
2.9
6.3
Inferred
17.7
480
8.5
18.7
Figure 1: Overview of Boss’ Eastern and Western Region tenements, South Australia.
Gould’s Dam deposit
The Gould’s Dam deposit is located within the “Western Region” project area ~80km northwest of the
Honeymoon Mine (Figure 1) and currently contains a JORC-compliant resource (Table 1) of 4.4Mt @
650ppm U308 for 6.3Mlbs contained U308 (Indicated) and 17.7Mt @ 480ppm U308for 18.7Mlbs contained
U308 (Inferred). The “Indicated” portion of the deposit covers a strike length of ~1.5km while the “Inferred”
resource extends a further ~8km to the north within the Billeroo palaeovalley (Figure 2).
1 Refer to ASX: BOE announcement dated 15 March 2017
2 Refer to ASX: BOE Announcement dated 8 April 2016
ASX: BOE
OTCQX: BQSSF
www.bossenergy.com
@Boss_Energy
Uranium mineralisation is associated with lower Eyre Formation sediments analogous to the mineralisation
at Honeymoon and Jason’s to the east.
The program at Gould’s Dam will comprise up to 60 rotary mud drill holes designed to acquire detailed host
aquifer lithological and hydrogeological characteristics across the “Indicated” portion of the resource, along
with confirmation/upgrade of historical drill results within the resource model (Figure 2). A number of infill
and step-out holes designed to potentially expand the mineralised footprint will also be completed as part
of this program.
A number of historical drilling intercepts (outlined below) peripheral to the current “Indicated” resource
represent potential to identify additional economic mineralized “pods” and will also be tested during this
program. Historical intercepts in the targeted area include:
• 7.5m @ 459ppm eU308
GT = 3,443 m.ppm BW142 from 120.7m;
GT = 2,853 m.ppm GLD229 from 118.5m;
• 3.5m @ 815ppm eU308
GT = 2,438 m.ppm GLD082 from 117.5m;
• 2m @ 1,219ppm eU308
GT = 2,264 m.ppm BW324 from 118.3m.
• 3.7m @ 612ppm eU308
Figure 2: Gould’s Dam resource and peripheral target areas.
ASX: BOE
OTCQX: BQSSF
www.bossenergy.com
@Boss_Energy
Jason’s Deposit
The Jason’s deposit is located ~13km north of the Honeymoon Mine (Figure 3) and comprises a JORCcompliant resource of 6.2Mt @ 790ppm U308 for 10.7Mlbs contained U308 (Inferred) – see Table 1. The
deposit is also hosted within lower Eyre Formation sediments within the Yarramba palaeovalley, similar to
the nearby Honeymoon deposit. The drill spacing across the deposit at present is still relatively coarse at
up to 250m, with a number of prospective areas peripheral to the identified mineralisation remaining
relatively untested.
This program will comprise a combination of resource infill and step-out rotary mud drilling, with the aim
of both confirming and extending the continuity of identified mineralised zones along with
confirmation/upgrade of a number of historical drill results within the resource model. The program will
also provide detailed hydrogeological information on the host Eyre Formation aquifers within the deposit
for the first time.
Figure 3: Location of the Jason’s deposit.
ASX: BOE
OTCQX: BQSSF
www.bossenergy.com
@Boss_Energy
Honeymoon Project Mineral Resource
The global Honeymoon Mineral Resource stands at 71.6 Mlb (52.4Mt) with an average grade of 620ppm
U308, using a cut-off grade of 250ppm, as summarised in Table 2.
The current Honeymoon restart feasibility studies utilise only a portion of Honeymoon’s JORC resource,
excluding 36Mlb of JORC resource outside the HRA, which could expand the mine life, and Boss’ defined
exploration target could potentially extend the mine life beyond the initial 11 years and increase the
production profile. Honeymoon’s Federal EPIP Act approvals allow export of more than 3Mlbs/annum U308
equivalent.
In addition to the global Mineral Resource, the Honeymoon Uranium Project also has an Exploration Target
range of 28 Mt to 133 Mt of mineralisation at a grade of 340 ppm to 1,080 ppm U308 for a contained 58
Mlbs to 190 Mlbs U308 (26,300 to 86,160 tonnes of contained U308), using a cut-off of 250ppm 3. Note the
potential quantity and grade of the Exploration Target range is conceptual in nature. There has been
insufficient exploration to estimate a Mineral Resource and it is uncertain whether future exploration will
result in the definition of a Mineral Resource.
Table 2: Summary of Mineral Resource for satellite deposits of Gould’s Dam and Jason’s
Resource
Classification
Tonnage
(Million Tonnes)
Average Grade
(ppm U3O8)
Contained Metal
(Kt, U3O8)
Contained Metal
(Mlb, U3O8)
4.9
10.7
Jason’s (March 2017) 4
Inferred
6.2
790
Gould’s Dam (April 2016) 5
Indicated
4.4
650
2.9
6.3
Inferred
17.7
480
8.5
18.7
Honeymoon Restart Area (January 2019)
Measured
3.1
1,100
3.4
7.6
Indicated
14
610
8.7
19
Inferred
7.0
590
4.1
9.1
GLOBAL HONEYMOON URANIUM PROJECT
Measured
3.1
1,100
3.4
7.6
Indicated
18.4
630
12.0
25.3
Inferred
30.9
570
18.0
38.5
Total
52.4
620
32.5
71.6
This ASX announcement was approved and authorised by the Board of Boss Energy Limited.
3 Refer to ASX: BOE announcement dated 25 March 2019
4 Refer to ASX: BOE announcement dated 15 March 2017
5 Refer to ASX: BOE Announcement dated 8 April 2016
ASX: BOE
OTCQX: BQSSF
www.bossenergy.com
@Boss_Energy
For further information, contact:
Duncan Craib
Chief Executive Officer
P: +61 (8) 6263 4494
E: boss@bossenergy.com
For media enquiries, contact:
Paul Armstrong
Read Corporate
P: +61 (8) 9388 1474
E: info@readcorporate.com
Competent Person’s Statement
The information contained in this announcement that relates to exploration results is provided by Mr Jason
Cherry, who is a Member of the Australasian Institute of Geoscientists (AIG). Mr Cherry has sufficient
experience that is relevant to the style of mineralisation and type of deposit under consideration, and to the
activity being undertaken to qualify as a Competent Person, as defined in the JORC 2012 edition of the
“Australasian Code for Reporting of Mineral Resources and Ore Reserves”. Mr Cherry has 17 years’ experience
and is a full-time employee as Geology Manager for Boss Energy Ltd. Mr Cherry consents to the inclusion in
this report of the matters based on this information in the form and context in which they appear.
Reference to previous ASX announcements
In relation to the results of the Feasibility Study announced 21 January 2020, the Company confirms that all
material assumptions underpinning the production target and forecast financial information included in that
announcement continue to apply and have not materially changed.
In relation to the Mineral Resource announced on 25 February 2019 and the Exploration Targets announced
on 25 March 2019, the Company confirms that it is not aware of any new information or data that materially
affects the information included in the original market announcement and that all material assumptions and
technical parameters underpinning the estimates in that market announcement continue to apply and have
not materially changed.
Forward-Looking Statements
This announcement includes forward-looking statements. These forward-looking statements are based on the
Company’s expectations and beliefs concerning future events. Forward-looking statements are necessarily
subject to risks, uncertainties, and other factors, many of which are outside the control of Boss Energy, which
could cause actual results to differ materially from such statements. Boss Energy makes no undertaking to
subsequently update or revise the forward-looking statements made in this announcement, to reflect the
circumstances or events after the date of this announcement.
ASX: BOE
OTCQX: BQSSF
www.bossenergy.com
@Boss_Energy
APPENDIX 1 – Historical Drill Results
In accordance with ASX Listing Rule 5.7.2, the Company provides the following information:
Table 1: Summary of historical drill holes listed within this report. All holes were drilled vertically (-90˚
inclination and 0˚ azimuth)
Hole ID
BW142
BW324
GLD082
GLD229
Easting
Northing
RL
EOH
MGA94, z54
400,618
6,520,092
401,233
6,516,917
401,320
6,517,660
400,160
6,520,349
(m)
75.0
80.7
79.0
74.5
(m)
136
128
126
138
Depth
From
(m)
120.69
118.29
117.50
118.50
Thickness
(m)
7.50
3.70
2.00
3.50
eU3O8
(ppm)
459
612
1,219
815
GradeThickness
(m.ppm)
3,443
2,264
2,438
2,853
Historical eU3O8 grade data derived from calibrated gamma tool data sampled historically at the time of drilling
these holes.
Values are reported above the nominal 250ppm eU3O8 cutoff grade, 0.5m minimum interval thickness and
maximum 1m internal dilution.
ASX: BOE
OTCQX: BQSSF
www.bossenergy.com
@Boss_Energy
JORC Code, 2012 Edition – Table 1
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria
Sampling
techniques
Drilling
techniques
Drill sample
recovery
ASX: BOE
JORC Code Explanation
Commentary
• Nature and quality of sampling (eg cut channels, random chips, or specific
specialised industry standard measurement tools appropriate to the
minerals under investigation, such as down hole gamma sondes, or
handheld XRF instruments, etc). These examples should not be taken as
limiting the broad meaning of sampling.
• Include reference to measures taken to ensure sample representivity and
the appropriate calibration of any measurement tools or systems used.
• Aspects of the determination of mineralisation that are Material to the
Public Report.
• In cases where ‘industry standard’ work has been done this would be
relatively simple (eg ‘reverse circulation drilling was used to obtain 1 m
samples from which 3 kg was pulverised to produce a 30 g charge for fire
assay’). In other cases more explanation may be required, such as where
there is coarse gold that has inherent sampling problems. Unusual
commodities or mineralisation types (eg submarine nodules) may warrant
disclosure of detailed information.
• Drill type (eg core, reverse circulation, open-hole hammer, rotary air blast,
auger, Bangka, sonic, etc) and details (eg core diameter, triple or standard
tube, depth of diamond tails, face-sampling bit or other type, whether
core is oriented and if so, by what method, etc).
• Method of recording and assessing core and chip sample recoveries and
results assessed.
• Measures taken to maximise sample recovery and ensure representative
nature of the samples.
• Whether a relationship exists between sample recovery and grade and
whether sample bias may have occurred due to preferential loss/gain of
fine/coarse material.
• The BW series drill holes were geophysically logged with calibrated
gamma tool and lithological tools (SP, resistivity and neutron) by Austral
United Geophysical between 1976 and 1982.
• The GLD series drill holes were geophysically logged upon completion
with in-house calibrated gamma tools (Robertson tools, both 1” and 4”
crystals), along with induction and resistivity tools in 2004 (GLD082,
Southern Cross Resources) and 2006 (GLD229, Southern Cross Resources).
OTCQX: BQSSF
• The drilling technique used for all holes was the Rotary Mud drilling
technique.
• Drill chips were collected for geological logging purposes only, with
recovery described as being good.
www.bossenergy.com
@Boss_Energy
Criteria
Logging
Sub-sampling
techniques
and sample
preparation
Quality of
assay data
and laboratory
tests
Verification of
sampling and
assaying
ASX: BOE
JORC Code Explanation
Commentary
• Whether core and chip samples have been geologically and geotechnically
logged to a level of detail to support appropriate Mineral Resource
estimation, mining studies and metallurgical studies.
• Whether logging is qualitative or quantitative in nature. Core (or costean,
channel, etc) photography.
• The total length and percentage of the relevant intersections logged.
• If core, whether cut or sawn and whether quarter, half or all core taken.
• If non-core, whether riffled, tube sampled, rotary split, etc and whether
sampled wet or dry.
• For all sample types, the nature, quality and appropriateness of the
sample preparation technique.
• Quality control procedures adopted for all sub-sampling stages to
maximise representivity of samples.
• Measures taken to ensure that the sampling is representative of the in situ
material collected, including for instance results for field
duplicate/second-half sampling.
• Whether sample sizes are appropriate to the grain size of the material
being sampled.
• The nature, quality and appropriateness of the assaying and laboratory
procedures used and whether the technique is considered partial or total.
• For geophysical tools, spectrometers, handheld XRF instruments, etc, the
parameters used in determining the analysis including instrument make
and model, reading times, calibrations factors applied and their
derivation, etc.
• Nature of quality control procedures adopted (eg standards, blanks,
duplicates, external laboratory checks) and whether acceptable levels of
accuracy (ie lack of bias) and precision have been established.
• All four holes were geologically logged, with graphical logs presented
within open file technical reports (ENV02713, ENV03329 & ENV09561).
These logs have been digitised, verified and incorporated into the Boss
Energy database.
• The verification of significant intersections by either independent or
alternative company personnel.
• The use of twinned holes.
• Documentation of primary data, data entry procedures, data verification,
data storage (physical and electronic) protocols.
• Discuss any adjustment to assay data.
• Given the historic nature of the data from the BW series drilling, it has not
been possible to verify these results.
• Results from other GLD series drill holes were able to be compared with
Prompt Fission Neutron (PFN) tools. The Competent Person has reviewed
and verified these data and is satisfied that the assays are of sufficient
quality to provide reasonable, indicative basis for the existence of
potentially economic mineralisation within the specified target areas.
OTCQX: BQSSF
• No assay sampling was carried out for the drill holes in question.
• Calibration information for the gamma tools used for the BW series drill
holes was not elaborated on within the historical reporting. Due to the
historic nature of the logging data and uranium grades for the BW series
drill holes included in this report, it is not possible to comment on the
accuracy or quality of any calibration systems or methods used to
produce the historical results.
• Robertson gamma tools used during the 2004 & 2006 drilling (GLD series)
were calibrated at the PIRSA calibration facility in Adelaide prior to the
program commencing.
www.bossenergy.com
@Boss_Energy
Criteria
JORC Code Explanation
Commentary
Location of
data points
• Accuracy and quality of surveys used to locate drill holes (collar and downhole surveys), trenches, mine workings and other locations used in Mineral
Resource estimation.
• Specification of the grid system used.
• Quality and adequacy of topographic control.
• Due to the historic nature of the BW series drill holes, there is little
information available on methods used to peg drill holes. Hole locations
have been verified by digitizing historical maps and using modern satellite
imagery. Coordinates are cited in MGA94 grid, z54.
• The more recent GLD series drill holes were located using a hand-held
DGPS, with an accuracy of ~0.1m. Coordinates are cited in MGA94 grid,
z54.
Data spacing
and
distribution
• Data spacing for reporting of Exploration Results.
• Whether the data spacing and distribution is sufficient to establish the
degree of geological and grade continuity appropriate for the Mineral
Resource and Ore Reserve estimation procedure(s) and classifications
applied.
• Whether sample compositing has been applied.
• Whether the orientation of sampling achieves unbiased sampling of
possible structures and the extent to which this is known, considering the
deposit type.
• If the relationship between the drilling orientation and the orientation of
key mineralised structures is considered to have introduced a sampling
bias, this should be assessed and reported if material.
• The measures taken to ensure sample security.
• The Competent Person has reviewed all available data and, based on their
knowledge and experience with the various exploration techniques
employed, is satisfied that the historical drilling data included here is of
sufficient quality and accuracy to provide a reasonable, if indicative, basis
for the mineralisation reported herein.
• The results of any audits or reviews of sampling techniques and data.
• All information and data used in this report have been reviewed by the
Boss Energy Competent Person. Due to the historic nature of the results
reported therein, no further reviews or audits have been undertaken.
Orientation of
data in
relation to
geological
structure
Sample
security
Audits or
reviews
ASX: BOE
OTCQX: BQSSF
• All modern & historical holes were drilled vertically which provides an
accurate intersection of the flat laying mineralised bodies.
• Due to the historic nature of the downhole geophysical data reported
therein, it is not always possible to comment on the sample security
methods employed for the data used to produce the results described in
this report.
• As these data are from areas that are in a purely exploratory stage of
operation, the Competent Person has considered that any issues
potentially relating to sample security do not present a material risk at
this current stage of evaluation.
www.bossenergy.com
@Boss_Energy
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria
Mineral
tenement and
land tenure
status
JORC Code explanation
Commentary
• Type, reference name/number, location and ownership including
agreements or material issues with third parties such as joint ventures,
partnerships, overriding royalties, native title interests, historical sites,
wilderness or national park and environmental settings.
• The security of the tenure held at the time of reporting along with any
known impediments to obtaining a licence to operate in the area.
• Acknowledgment and appraisal of exploration by other parties.
• The Project consists of 1 granted Mining Lease, 5 granted Exploration
Licenses, 3 Retention Leases and 2 Miscellaneous Purpose Licenses.
Geology
• Deposit type, geological setting and style of mineralisation.
Palaeovalley-type, sand-hosted, tabular style uranium of the following model:
• Narrower, mineralised, palaeochannels within a broader palaeovalley
system,
• Underlying basement faults reactivated sporadically, greatly influencing the
shape and formation of the overlying fluvial system, creating uplifted ridges
of basement and the meandering narrow palaeochannels described above;
• REDOX interfaces from the vertical and lateral movement of uraniferous
(oxidised) fluids from south (granitic source rocks in the Olary Ranges) to
north (towards Lake Frome);
• Organic/sulphide-rich horizons and possible hydrocarbon fluids, the latter
seeping upwards along the basement faults. Organic- and sulphide-rich
material formed within shallow channel embankments and ledges.
Drill hole
Information
• A summary of all information material to the understanding of the
exploration results including a tabulation of the following information for all
Material drill holes:
o easting and northing of the drill hole collar
o elevation or RL (Reduced Level – elevation above sea level in metres) of
the drill hole collar
o dip and azimuth of the hole
o down hole length and interception depth
o hole length.
• Please refer to Appendix 1, Table 1 for drill collar information.
Exploration
done by other
parties
ASX: BOE
OTCQX: BQSSF
• The Gould’s Dam region and surrounding areas of the Billeroo and
Curnamona palaeovalleys have been systematically explored and drilled
starting from 1969.
www.bossenergy.com
@Boss_Energy
Criteria
Data
aggregation
methods
Relationship
between
mineralisation
widths and
intercept
lengths
Diagrams
Balanced
reporting
Other
substantive
exploration
data
ASX: BOE
JORC Code explanation
Commentary
• If the exclusion of this information is justified on the basis that the
information is not Material and this exclusion does not detract from the
understanding of the report, the Competent Person should clearly explain
why this is the case.
• In reporting Exploration Results, weighting averaging techniques, maximum
and/or minimum grade truncations (eg cutting of high grades) and cut-off
grades are usually Material and should be stated.
• Where aggregate intercepts incorporate short lengths of high grade results
and longer lengths of low grade results, the procedure used for such
aggregation should be stated and some typical examples of such
aggregations should be shown in detail.
• The assumptions used for any reporting of metal equivalent values should
be clearly stated.
• These relationships are particularly important in the reporting of Exploration
Results.
• If the geometry of the mineralisation with respect to the drill hole angle is
known, its nature should be reported.
• If it is not known and only the down hole lengths are reported, there should
be a clear statement to this effect (eg ‘down hole length, true width not
known’).
• Appropriate maps and sections (with scales) and tabulations of intercepts
should be included for any significant discovery being reported These should
include, but not be limited to a plan view of drill hole collar locations and
appropriate sectional views.
• Where comprehensive reporting of all Exploration Results is not practicable,
representative reporting of both low and high grades and/or widths should
be practiced to avoid misleading reporting of Exploration Results.
• Other exploration data, if meaningful and material, should be reported
including (but not limited to): geological observations; geophysical survey
results; geochemical survey results; bulk samples – size and method of
treatment; metallurgical test results; bulk density, groundwater,
geotechnical and rock characteristics; potential deleterious or
contaminating substances.
OTCQX: BQSSF
• Mineralised intervals were chosen based upon a nominal 250ppm U3O8
cutoff, 0.50 m minimum interval thickness and maximum 1m internal
dilution for reporting. Where available, Prompt Fission Neutron (PFN) data
is used which is designated pU3O8. For historical drilling or in instances
during modern drilling where the PFN tool data was unavailable, gamma
toll derived data is used which is designated eU3O8 and may be affected by
radiometric disequilibrium.
• Historic drill traverses were oriented at oblique angles across the strike of
the palaeovalley as per the historical interpretation current at the time of
drilling.
• Modern drill traverses are often oriented at right angle across the domain
strike, although this can vary depending on the interpreted geological
setting of each area.
• Appropriate and relevant diagrams have been included in the
announcement
• Balanced reporting has been adhered to. See previous exploration
announcements.
• Mineralisation is still open along the strike of the various domains referred
to herein.
www.bossenergy.com
@Boss_Energy
Criteria
JORC Code explanation
Commentary
Further work
• The nature and scale of planned further work (eg tests for lateral extensions
or depth extensions or large-scale step-out drilling).
• Diagrams clearly highlighting the areas of possible extensions, including the
main geological interpretations and future drilling areas, provided this
information is not commercially sensitive.
• Further work will involve a combination of twinning historical drill holes (to
verify grade data) and if justified step-out drilling of these holes to test for
continuity of mineralisation.
• All results will be used to update the resource model upon the completion
of drilling.
ASX: BOE
OTCQX: BQSSF
www.bossenergy.com
@Boss_Energy
Share your feedback
Discover