Strong infill drilling results at Gould's Dam deposit
Released
Released
Announcement PDF
ASX Release 12 September 2023
Honeymoon Uranium Project, South Australia
Strong infill drilling results at Gould’s
Dam satellite deposit support plan to
grow mine life and production rates
In light of the strong results, Boss will now prepare for technical and economic
studies on developing Gould’s Dam as an additional production source
Highlights
•
Infill drilling within the Indicated Resource at Gould’s Dam has returned a host of strong results
•
The latest results include (PFN results, ppm pU3O8):
o 5.50m @ 1,315ppm pU3O8
GT 7,231
➢ plus 4.25m @ 445ppm pU3O8 GT 1,891
o 5.25m @ 1,014ppm pU3O8
GT 5,324
➢ plus 4.50m @ 407ppm pU3O8 GT 1,832
o 3.00m @ 1,510ppm pU3O8
GT 4,530
➢ plus 2.50m @ 1,190ppm pU3O8 GT 2,975
o 2.00m @ 2,085ppm pU3O8
GT 4,170
1
(WRM0032 from 114.25m)
(WRM0032 from 108.50m)
(WRM0023 from 115.00m)
(WRM0023 from 121.25m)
(WRM0027 from 120.75m)
(WRM0027 from 105.50m)
(WRM0028 from 114.25m)
•
Boss will now start baseline studies on Gould’s Dam with the aim of advancing the deposit
towards production; This is in line with the Company’s strategy to grow the inventory, mine life
and production rates at Honeymoon
•
As part of the assessment process, Boss will drill two sonic core holes and install six
groundwater monitoring wells
•
In parallel with these studies, Boss will undertake a scout drilling program at Gould’s Dam to
test targets outside the known Resource
•
Gould’s Dam is located ~80km north-west of the Honeymoon mine and contains a JORC
Resource of 4.4Mt at 650ppm U308 for 6.3Mlbs contained U308 (Indicated) and 17.7Mt at
480ppm U308 for 18.7Mlbs contained U308 (Inferred)
•
Boss’ exploration strategy has already been highly successful, increasing the JORC Resource at
Honeymoon from 16.6Mlbs to 71.6Mlbs (~4.3x increase) since project acquisition in December
20151
•
The current life-of-mine plan at Honeymoon is based on just 50% of the existing JORC Resource
Refer to ASX: BOE announcement dated 25 February 2019. Refer Appendix 1 for Honeymoon JORC 2012 Resource.
FOR FURTHER INFORMATION PLEASE CONTACT:
Boss Energy Limited
ABN 38 116 834 336
Duncan Craib - Managing Director/ CEO
+61 (08) 6263 4494
ASX: BOE
OTCQX: BQSSF
Level 1, 420 Hay Street, Subiaco
Western Australia 6008
Paul Armstrong – Public Relations
+61 (08) 9388 1474
www.bossenergy.com
@Boss_Energy
Boss Energy Limited (ASX: BOE; OTCQX: BQSSF) is pleased to announce more strong drilling results
from within the Indicated Resource at the Gould’s Dam deposit at its Honeymoon Uranium Project.
The results are important because they support Boss’ strategy to grow the production rates and mine
life at Honeymoon.
Boss Managing Director Duncan Craib said “These latest infill drilling results demonstrate the quality
of the Gould’s Dam deposit and the strong potential for it to play an important role in the growth
strategy at Honeymoon.
“In light of all the drilling results we have received, we have decided to start baseline technical and
economic studies on Gould’s Dam with the aim of moving it towards development. We will also
undertake scout drilling to potentially grow the overall Gould’s Dam Resource.
“This approach is consistent with our overall aim of growing Honeymoon’s production, which will in
turn enable us to capitalise fully on the infrastructure we are establishing at the project, in turn driving
strong financial returns”.
Drilling Detail
The 2023 drilling program within the Indicated Resource at Gould’s Dam was designed to infill a
number of gaps within the existing drilling coverage, twin a series of historical drill holes to confirm
grade intercepts and ultimately provide detailed geological and hydrogeological information of the
Eyre Formation sediments hosting the uranium mineralisation across the deposit. All of this work will
ultimately feed into an updated geological model and Mineral Resource Estimate update for the
Gould’s Dam project which is scheduled to be completed in 2024.
Several infill and step-out holes completed during the latest phase of drilling have produced excellent
results – confirming continuity of uranium mineralisation at closer drill spacings than the existing 40m
drilling coverage. Historic hole GLD016 was drilled in 2004 by Southern Cross Resources and returned
exceptional uranium intercepts including 3.75m @ 3,030ppm pU3O8 from 107.25m (GT = 11,363
m.ppm) and 2.75m @ 920ppm pU3O8 from 116.50m (GT = 2,530 m.ppm). As part of the current drilling
program, hole WRM0032 was drilled as a close-spaced stepout hole ~10m from GLD016 to get a feel
for short scale uranium mineralization variability. This new hole returned excellent uranium intercepts
and demonstrated continuation of the main mineralized horizons, with the highest grade and thickness
this time associated with the lower of the two zones (PFN results, ppm pU3O8):
o 5.50m @ 1,315ppm pU3O8
➢ plus 4.25m @ 445ppm pU3O8
GT 7,231
GT 1,891
(WRM0032 from 114.25m)
(WRM0032 from 108.50m)
Another hole drilled to examine short-scale continuation of uranium mineralisation was WRM0023,
which was drilled in between two historic holes (GLD378 & GLD379) completed in 2009 by Uranium
One Australia. The two historic holes are located ~40m apart and both returned intercepts across two
mineralized horizons including 2.75m @ 697ppm pU3O8 from 111.25m (GT = 1,917 m.ppm) and 2.50m
@ 725ppm pU3O8 from 116.50m (GT = 1,813 m.ppm) from hole GLD378, with 2.75m @ 697ppm pU3O8
from 112.25m (GT = 1,917 m.ppm) and 1.00m @ 3,749ppm pU3O8 from 117.75m (GT = 3,749 m.ppm)
returned from hole GLD379. New hole WRM0023 was located centrally between these two holes and
confirmed continuity of the main mineralized horizon and also identified an additional ore zone within
the lower Eyre Formation, returning (PFN results, ppm pU3O8):
o 5.25m @ 1,014ppm pU3O8
➢ plus 4.50m @ 407ppm pU3O8
ASX: BOE
OTCQX: BQSSF
GT 5,324
GT 1,832
(WRM0023 from 115.00m)
(WRM0023 from 121.25m)
www.bossenergy.com
@Boss_Energy
A number of historic holes have been re-drilled as part of this latest phase of drilling, including GLD296
(drilled in 2009), GLD368 (drilled in 2009) and GLD398 (drilled in 2010) which were all drilled by
Uranium One Australia but could not be logged with PFN or calibrated gamma tools at the time. New
drill holes WRM0027 (redrill of GLD398), WRM0028 (redrill of GLD368) and WRM0043 (redrill of
GLD296) produced very solid uranium grades and ore zone thicknesses which can now be included in
the upcoming Mineral Resource Update, with highlights including (PFN results, ppm pU3O8):
o 3.00m @ 1,510ppm pU3O8
GT 4,530
➢ plus 2.50m @ 1,190ppm pU3O8 GT 2,975
o 2.00m @ 2,085ppm pU3O8
GT 4,170
o 3.25m @ 617ppm pU3O8
GT 2,005
(WRM0027 from 120.75m)
(WRM0027 from 105.50m)
(WRM0028 from 114.25m)
(WRM0043 from 102.25m)
In addition to the drilling completed to date, six groundwater monitoring wells and two sonic core
holes will also be completed in the coming weeks within the Indicated mineral resource footprint to
provide baseline groundwater information and core samples for metallurgical and geochemical test
work. Furthermore, a limited scout drilling program of promising targets at Gould’s Dam East and
Gould’s Dam North within the current Inferred resource boundary is nearing completion, with the aim
of identifying additional areas of economic mineralisation proximal to the current Indicated Resource
footprint. Once the current work at Gould’s Dam is completed, a resource infill drilling program will
commence at the Jason’s satellite deposit located ~13km north of the Honeymoon Mine.
Gould’s Dam deposit
The Gould’s Dam deposit is located ~80km northwest of the Honeymoon Mine and currently contains
a JORC-compliant resource (Table 1) of 4.4Mt @ 650ppm U308 for 6.3Mlbs contained U308 (Indicated)
and 17.7Mt @ 480ppm U308for 18.7Mlbs contained U308 (Inferred).
Table 1: Summary of Mineral Resource for satellite deposit of Gould’s Dam
Resource
Classification
Tonnage
(Million Tonnes)
Average Grade
(ppm U3O8)
Contained Metal
(Kt, U3O8)
Contained Metal
(Mlb, U3O8)
Gould’s Dam (April 2016) 2
Indicated
4.4
650
2.9
6.3
Inferred
17.7
480
8.5
18.7
About Boss Energy
Honeymoon is on track for first production in the December quarter, 2023. The mine is increasing the
production profile to 2.45 Mlb/annum over a plus-10 year mine life but utilising only 36Mlbs of the
Project’s global JORC Resource of 71.6Mlbs. This means there is substantial scope to extend the mine
life and increase the EFS production nameplate capacity of 2.45Mlb/annum from the remaining
identified JORC Resource. There are also significant resource growth opportunities from the
Company’s satellite deposits and significant defined Exploration Target3.
The Company anticipates the satellite resources to allow both an increase in the overall production
profile with minimal disturbance to operations and extend the mine life of the Honeymoon Project.
Boss holds high expectations that its exploration activities will continue to deliver increase Resources.
2 Refer to ASX: Announcement dated 8 April 2016.
3 Refer to ASX: Announcement dated 25 March 2019.
ASX: BOE
OTCQX: BQSSF
www.bossenergy.com
@Boss_Energy
The Company has grown the global JORC resource from 16.6Mlbs to 71.6Mlbs (~4.3x increase) since
acquiring Honeymoon in December 2015.
Figure 1: Overview of recently completed drilling program at Gould’s Dam.
ASX: BOE
OTCQX: BQSSF
www.bossenergy.com
@Boss_Energy
This ASX announcement was approved and authorised by the Board of Boss Energy Limited.
For further information, contact:
Duncan Craib
Chief Executive Officer
P: +61 (8) 6263 4494
E: boss@bossenergy.com
For media enquiries, contact:
Paul Armstrong
Read Corporate
P: +61 (8) 9388 1474
E: info@readcorporate.com
Competent Person’s Statement
The information contained in this announcement that relates to exploration results is provided by Mr
Jason Cherry, who is a Member of the Australasian Institute of Geoscientists (AIG). Mr Cherry has
sufficient experience that is relevant to the style of mineralisation and type of deposit under
consideration, and to the activity being undertaken to qualify as a Competent Person, as defined in the
JORC 2012 edition of the “Australasian Code for Reporting of Mineral Resources and Ore Reserves”. Mr
Cherry has 17 years’ experience and is a full-time employee as Geology Manager for Boss Energy Ltd. Mr
Cherry consents to the inclusion in this report of the matters based on this information in the form and
context in which they appear.
Reference to previous ASX announcements
In relation to the results of the Feasibility Study announced 21 January 2020, the Company confirms that
all material assumptions underpinning the production target and forecast financial information included
in that announcement continue to apply and have not materially changed. Nothing in this announcement
pre-empts the findings of the Enhanced Feasibility Study currently being undertaken.
In relation to the Mineral Resource announced on 8 April 2016, 25 February 2019 and the Exploration
Targets announced on 25 March 2019, the Company confirms that it is not aware of any new information
or data that materially affects the information included in the original market announcement and that all
material assumptions and technical parameters underpinning the estimates in that market
announcement continue to apply and have not materially changed.
Forward-Looking Statements
This announcement includes forward-looking statements. These forward-looking statements are based
on the Company’s expectations and beliefs concerning future events. Forward-looking statements are
necessarily subject to risks, uncertainties, and other factors, many of which are outside the control of Boss
Energy, which could cause actual results to differ materially from such statements. Boss Energy makes no
undertaking to subsequently update or revise the forward-looking statements made in this
announcement, to reflect the circumstances or events after the date of this announcement.
ASX: BOE
OTCQX: BQSSF
www.bossenergy.com
@Boss_Energy
APPENDIX 1 – Table 1: Historical drill results
In accordance with ASX Listing Rule 5.7.2, the Company provides the following information:
Table 1: Summary of historical drill holes listed within this report.
All holes were drilled vertically (-90˚ inclination and 0˚ azimuth).
Hole ID
GLD016
GLD296
GLD368
GLD378
Easting
Northing
RL
EOH
From
MGA94, z54
400120
6517840
plus
plus
400198
6517477
400079
6517963
400037
6518043
(m)
77
(m)
134
(m)
107.25
116.50
122.50
78
77
76
132
132
138
106.00
plus
111.25
plus
116.50
GLD379
399999
6518043
77
138
112.25
plus
117.75
GLD398
400080
6518120
77
132
* All results reported as PFN-derived pU3O8 in the above table.
To
Width
pU3O8*
(m)
(m)
(ppm)
111.00
3.75
3,030
119.25
2.75
920
126.50
4.00
512
No uranium grade data available
No uranium grade data available
107.00
1.00
645
114.00
2.75
697
119.00
2.50
725
115.00
2.75
697
118.75
1.00
3,749
No uranium grade data available
Grade
Thickness
(m.ppm)
11,363
2,530
2,048
645
1,917
1,813
1,917
3,749
Values are reported above the nominal 250ppm eU3O8 cutoff grade, 0.5m minimum interval thickness
and maximum 1m internal dilution.
Table 2: Summary of results to date from the Gould’s Dam drilling program.
All holes were drilled vertically (-90˚ inclination and 0˚ azimuth).
Width
pU3O8*
108.50
111.00
106.50
119.00
105.50
116.25
120.75
Grade
Thickness
(m)
(m)
(ppm)
(m.ppm)
118.00
1.00
1,186
1,186
124.00
1.50
1,272
1,908
111.50
1.75
308
539
113.50
1.00
385
385
120.25
5.25
1,014
5,324
125.75
4.50
407
1,832
Hole collapsed - no logs obtained
109.75
1.25
690
863
113.25
2.25
565
1,271
107.50
1.00
881
881
121.25
2.25
543
1,222
108.00
2.50
1,190
2,975
117.25
1.00
670
670
123.75
3.00
1,510
4,530
107.75
114.25
122.50
112.50
107.00
110.25
116.25
126.00
114.50
109.00
2.50
2.00
3.50
2.00
2.00
490
2,085
365
336
341
RL
EOH
From
WRM0022
MGA94, z54
400,001 6,518,000
plus
(m)
77
(m)
132
WRM0023
400,019
6,518,043
plus
plus
plus
77
132
(m)
117.00
122.50
109.75
112.50
115.00
121.25
WRM0024
WRM0025
400,004
399,920
77
76
133
133
76
133
76
133
WRM0028
6,518,080
6,518,121
plus
400,000 6,518,163
plus
400,072 6,518,121
plus
plus
400,079 6,517,960
77
133
WRM0029
WRM0030
plus
plus
400,120 6,518,001
400,004 6,517,846
77
78
133
133
WRM0026
WRM0027
ASX: BOE
Easting
To
Northing
Hole ID
OTCQX: BQSSF
www.bossenergy.com
1,225
4,170
1,278
672
682
@Boss_Energy
Hole ID
WRM0031
WRM0032
WRM0033
WRM0034
WRM0035
WRM0036
WRM0037
WRM0038**
WRM0039
WRM0040**
WRM0041
WRM0042
WRM0043
WRM0044
Northing
RL
EOH
From
To
Width
pU3O8*
Grade
Thickness
MGA94, z54
plus
400,080 6,517,884
plus
400,114 6,517,840
plus
(m)
(m)
77
133
77
133
(m)
111.50
111.00
122.25
108.50
(m)
113.75
112.00
124.25
112.75
(m)
2.25
1.00
2.00
4.25
(ppm)
313
1,074
445
445
(m.ppm)
704
1,074
890
1,891
114.25
124.50
102.50
122.25
103.75
114.50
119.75
127.00
105.25
123.75
106.00
117.75
5.50
2.50
2.75
1.50
2.25
3.25
1,315
357
838
322
433
818
7,231
891
2,305
483
974
2,659
104.50
114.00
116.25
123.25
107.00
2.50
569
1,423
115.50
1.50
678
1,017
119.50
3.25
471
1,531
124.00
0.75
516
387
Hole collapsed - no logs obtained
121.75
3.00
550
1,650
120.75
1.75
886
1,551
123.00
1.00
534
534
116.75
0.75
747
560
126.00
4.00
534
2,136
0.00
0.00
0
0
109.00
2.00
323
646
112.25
2.25
575
1,294
119.25
1.75
267
467
105.50
3.25
617
2,005
118.75
1.50
350
525
125.00
1.25
362
453
117.50
1.25
285
356
126.00
1.50
433
650
105.50
2.75
518
1,425
127.25
0.75
909
682
Hole collapsed - no logs obtained
115.50
3.50
309
1,082
Easting
plus
400,171 6,517,895
plus
400,273 6,517,964
plus
400,268 6,517,879
77
133
77
133
77
133
plus
plus
plus
400,280 6,518,164
400,282 6,518,202
78
78
133
133
400,011
400,013
6,518,455
6,518,507
77
78
133
133
6,518,625
plus
399,896 6,518,783
399,982 6,517,338
plus
plus
400,199 6,517,467
plus
plus
77
133
77
78
133
127
78
133
399,894
400,224
118.75
119.00
122.00
116.00
122.00
0.00
107.00
110.00
117.50
102.25
117.25
123.75
116.25
124.50
102.75
126.50
6,517,478
79
133
plus
WRM0045
400,155 6,517,714
78
133
plus
WRM0046
399,881 6,517,731
78
133
WRM0047
399929
6517799
78
133
112.00
* All results reported as PFN-derived pU3O8 in the above table.
**Drill holes WRM0038 & WRM0040 could not be logged with the PFN tool and are therefore reported as
calibrated gamma derived equivalent U3O8 (eU3O8).
Values are reported above the nominal 250ppm pU3O8 cutoff grade, 0.5m minimum interval thickness
and maximum 1m internal dilution.
ASX: BOE
OTCQX: BQSSF
www.bossenergy.com
@Boss_Energy
JORC Code, 2012 Edition – Table 1
Section 1 – Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria
JORC Code explanation
Commentary
Sampling
techniques
• Nature and quality of sampling (eg cut channels, random chips, or specific
specialised industry standard measurement tools appropriate to the
minerals under investigation, such as down hole gamma sondes, or
handheld XRF instruments, etc). These examples should not be taken as
limiting the broad meaning of sampling.
• Include reference to measures taken to ensure sample representivity and the
appropriate calibration of any measurement tools or systems used.
• Aspects of the determination of mineralisation that are Material to the
Public Report.
• In cases where ‘industry standard’ work has been done this would be
relatively simple (eg ‘reverse circulation drilling was used to obtain 1 m
samples from which 3 kg was pulverised to produce a 30 g charge for fire
assay’). In other cases more explanation may be required, such as where
there is coarse gold that has inherent sampling problems. Unusual
commodities or mineralisation types (eg submarine nodules) may warrant
disclosure of detailed information.
• Drill type (eg core, reverse circulation, open-hole hammer, rotary air blast,
auger, Bangka, sonic, etc) and details (eg core diameter, triple or standard
tube, depth of diamond tails, face-sampling bit or other type, whether core
is oriented and if so, by what method, etc).
• Method of recording and assessing core and chip sample recoveries and
results assessed.
• Measures taken to maximise sample recovery and ensure representative
nature of the samples.
• Whether a relationship exists between sample recovery and grade and
whether sample bias may have occurred due to preferential loss/gain of
fine/coarse material.
• The latest WRM series drill holes have been geophysically logged upon
completion with a combination of Prompt Fission Neutron (PFN), Borehole
Magnetic Resonance (BMR), calibrated gamma, neutron porosity, formation
density, induction and magnetic deviation tools. Data is collected at 1cm
intervals and incorporated in the Boss Energy drilling database.
• All natural gamma and Prompt Fission Neutron (PFN) tools used during this
drilling program were calibrated at the PIRSA calibration facility in Adelaide
prior to the program commencing.
Drilling
techniques
Drill sample
recovery
ASX: BOE
OTCQX: BQSSF
• The drilling technique used for all holes was the Rotary Mud, with all drilling
completed by highly experienced contractor Watson Drilling. Drill cuttings
were collected at 1m intervals for geological logging.
• Drill chips were collected for geological logging purposes only, with good to
very good sample recoveries.
www.bossenergy.com
@Boss_Energy
Criteria
JORC Code explanation
Commentary
Logging
• Whether core and chip samples have been geologically and geotechnically
logged to a level of detail to support appropriate Mineral Resource
estimation, mining studies and metallurgical studies.
• Whether logging is qualitative or quantitative in nature. Core (or costean,
channel, etc) photography.
• The total length and percentage of the relevant intersections logged.
• If core, whether cut or sawn and whether quarter, half or all core taken.
• If non-core, whether riffled, tube sampled, rotary split, etc and whether
sampled wet or dry.
• For all sample types, the nature, quality and appropriateness of the sample
preparation technique.
• Quality control procedures adopted for all sub-sampling stages to maximise
representivity of samples.
• Measures taken to ensure that the sampling is representative of the in situ
material collected, including for instance results for field duplicate/secondhalf sampling.
• Whether sample sizes are appropriate to the grain size of the material being
sampled.
• The nature, quality and appropriateness of the assaying and laboratory
procedures used and whether the technique is considered partial or total.
• For geophysical tools, spectrometers, handheld XRF instruments, etc, the
parameters used in determining the analysis including instrument make and
model, reading times, calibrations factors applied and their derivation, etc.
• Nature of quality control procedures adopted (eg standards, blanks,
duplicates, external laboratory checks) and whether acceptable levels of
accuracy (ie lack of bias) and precision have been established.
• The verification of significant intersections by either independent or
alternative company personnel.
• The use of twinned holes.
• Documentation of primary data, data entry procedures, data verification,
data storage (physical and electronic) protocols.
• Discuss any adjustment to assay data.
• All WRM series drill holes have been geologically logged and incorporated
into the Boss Energy database.
Sub-sampling
techniques and
sample
preparation
Quality of
assay data and
laboratory
tests
Verification of
sampling and
assaying
ASX: BOE
OTCQX: BQSSF
• The PFN tool has a depth of investigation radius of approximately 25-40 cm
around the borehole. This provides an accurate measurement of
epithermal/thermal neutron ratios for the calculation of pU3O8.
• No chemical assay sampling was carried out for the drill holes in question.
• All PFN and gamma tools being used as part of the current drilling campaign
have been calibrated at the PIRSA calibration facility in Adelaide by both Boss
Energy and logging contractor Borehole Wireline prior to the program
commencing.
• A number of twin holes are being drilled as part of the current campaign. The
PFN and calibrated gamma results from this drilling will be used to verify
previous PFN results and also to verify/upgrade the historic gamma logging
from the 1970’s/1980’s.
• Natural gamma logs are used to depth match all geophysical tool runs to
ensure accuracy.
www.bossenergy.com
@Boss_Energy
Criteria
JORC Code explanation
Commentary
Location of
data points
• Accuracy and quality of surveys used to locate drill holes (collar and downhole surveys), trenches, mine workings and other locations used in Mineral
Resource estimation.
• Specification of the grid system used.
• Quality and adequacy of topographic control.
• Data spacing for reporting of Exploration Results.
• Whether the data spacing and distribution is sufficient to establish the
degree of geological and grade continuity appropriate for the Mineral
Resource and Ore Reserve estimation procedure(s) and classifications
applied.
• Whether sample compositing has been applied.
• The current WRM series drill holes have been pegged using a Trimble TDC600
high accuracy DGPS with a nominal accuracy of ~0.1m. Coordinates are cited
in MGA94 grid, z54.
• Whether the orientation of sampling achieves unbiased sampling of possible
structures and the extent to which this is known, considering the deposit
type.
• If the relationship between the drilling orientation and the orientation of key
mineralised structures is considered to have introduced a sampling bias, this
should be assessed and reported if material.
• The measures taken to ensure sample security.
• All new & historical holes were drilled vertically which provides an accurate
intersection of the flat laying mineralised bodies.
• The results of any audits or reviews of sampling techniques and data.
• All information and data used in this report have been reviewed by the Boss
Energy Competent Person. Multiple PFN tools are being run on several of the
new WRM series holes for validation and comparison purposes.
Data spacing
and
distribution
Orientation of
data in relation
to geological
structure
Sample
security
Audits or
reviews
ASX: BOE
OTCQX: BQSSF
• The Competent Person has reviewed all available data and, based on their
knowledge and experience with the various exploration techniques
employed, is satisfied that the historical drilling data included here is of
sufficient quality and accuracy to provide a reasonable, if indicative, basis for
the mineralisation reported herein.
• The current WRM series drill hole spacing ranges from 40m to ~200m within
the Indicated portion of the deposit.
• All PFN and gamma-derived eU3O8 data (both new and historic) has been
composited to 25cm intervals.
•
All new data from the current campaign is processed and verified on site and
then incorporated directly into the Boss Energy database.
www.bossenergy.com
@Boss_Energy
Section 2 – Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section)
Criteria
JORC Code explanation
Commentary
Mineral
tenement and
land tenure
status
• Type, reference name/number, location and ownership including
agreements or material issues with third parties such as joint ventures,
partnerships, overriding royalties, native title interests, historical sites,
wilderness or national park and environmental settings.
• The security of the tenure held at the time of reporting along with any
known impediments to obtaining a licence to operate in the area.
• Acknowledgment and appraisal of exploration by other parties.
• The Project consists of 1 granted Mining Lease, 5 granted Exploration
Licenses, 3 Retention Leases and 2 Miscellaneous Purpose Licenses.
Geology
• Deposit type, geological setting and style of mineralisation.
Palaeovalley-type, sand-hosted, tabular style uranium of the following model:
• Narrower, mineralised, palaeochannels within a broader palaeovalley system,
• Underlying basement faults reactivated sporadically, greatly influencing the
shape and formation of the overlying fluvial system, creating uplifted ridges
of basement and the meandering narrow palaeochannels described above;
• REDOX interfaces from the vertical and lateral movement of uraniferous
(oxidised) fluids from south (granitic source rocks in the Olary Ranges) to
north (towards Lake Frome);
• Organic/sulphide-rich horizons and possible hydrocarbon fluids, the latter
seeping upwards along the basement faults. Organic- and sulphide-rich
material formed within shallow channel embankments and ledges.
Drill hole
Information
• A summary of all information material to the understanding of the
exploration results including a tabulation of the following information for all
Material drill holes:
o easting and northing of the drill hole collar
o elevation or RL (Reduced Level – elevation above sea level in metres) of
the drill hole collar
o dip and azimuth of the hole
o down hole length and interception depth
o hole length.
• Please refer to Appendix 1, Table 1 for drill collar information.
Exploration
done by other
parties
ASX: BOE
OTCQX: BQSSF
• The Gould’s Dam region and surrounding areas of the Billeroo and
Curnamona Palaeovalley’s have been systematically explored and drilled
starting from 1969.
www.bossenergy.com
@Boss_Energy
Criteria
Data
aggregation
methods
Relationship
between
mineralisation
widths and
intercept
lengths
Diagrams
Balanced
reporting
Other
substantive
exploration
data
ASX: BOE
JORC Code explanation
Commentary
• If the exclusion of this information is justified on the basis that the
information is not Material and this exclusion does not detract from the
understanding of the report, the Competent Person should clearly explain
why this is the case.
• In reporting Exploration Results, weighting averaging techniques, maximum
and/or minimum grade truncations (eg cutting of high grades) and cut-off
grades are usually Material and should be stated.
• Where aggregate intercepts incorporate short lengths of high grade results
and longer lengths of low grade results, the procedure used for such
aggregation should be stated and some typical examples of such
aggregations should be shown in detail.
• The assumptions used for any reporting of metal equivalent values should
be clearly stated.
• These relationships are particularly important in the reporting of Exploration
Results.
• If the geometry of the mineralisation with respect to the drill hole angle is
known, its nature should be reported.
• If it is not known and only the down hole lengths are reported, there should
be a clear statement to this effect (eg ‘down hole length, true width not
known’).
• Appropriate maps and sections (with scales) and tabulations of intercepts
should be included for any significant discovery being reported These should
include, but not be limited to a plan view of drill hole collar locations and
appropriate sectional views.
• Where comprehensive reporting of all Exploration Results is not practicable,
representative reporting of both low and high grades and/or widths should
be practiced to avoid misleading reporting of Exploration Results.
• Other exploration data, if meaningful and material, should be reported
including (but not limited to): geological observations; geophysical survey
results; geochemical survey results; bulk samples – size and method of
treatment; metallurgical test results; bulk density, groundwater,
geotechnical and rock characteristics; potential deleterious or
contaminating substances.
OTCQX: BQSSF
• Mineralised intervals were chosen based upon a nominal 250ppm U3O8
cutoff, 0.50 m minimum interval thickness and maximum 1m internal dilution
for reporting. Where available, Prompt Fission Neutron (PFN) data is used
which is designated pU3O8. For historical
Share your feedback
Discover