High-grade drilling results point to growth in mine life
Released
Released
Announcement PDF
ASX Release 16 August 2023
Honeymoon Uranium Project, South Australia
High-grade drilling results point to
growth in mine life and production rates
Strong results pave way for an increase and upgrade in the Resource
at Gould’s Dam deposit within the Honeymoon project
Highlights
•
Highly successful start to new drilling program at Gould’s Dam, with all 21 holes drilled to date
intersecting mineralisation
•
Exceptional Infill Drilling Results include (PFN results, ppm pU3O8):
o
o
o
5.25m @ 3,744ppm pU3O8
➢ plus 3.25m @ 1,150ppm pU3O8
2.75m @ 3,693ppm pU3O8
➢ plus 1.25m @ 2,277ppm pU3O8
4.25m @ 1,094ppm pU3O8
GT 19,658
GT 3,737
GT 10,154
GT 2,847
GT 4,651
(WRM0013 from 102.5m)
(WRM0013 from 110.25m)
(WRM0020 from 113.25m)
(WRM0020 from 117.75m)
(WRM0007 from 121.00m)
•
In addition, Twin Hole Validation drilling confirms an overall upgrade of historical drill results
•
The current life-of-mine plan at Honeymoon is based on just 50% of the existing JORC Resource
•
The combination of the substantial Resource which sits outside the mine plan and these latest
drilling results highlights the potential to grow the production rate and mine life at Honeymoon
•
A further ~40 holes still to be drilled as part of the Gould’s Dam program; Upon completion of
this program, resource infill drilling will start at the Jason’s satellite deposit
•
Boss’ exploration strategy has already been highly successful, increasing the JORC Resource at
Honeymoon from 16.57Mlbs to 71.67Mlbs (~433% increase) since project acquisition in
December 20151
•
“We have a two-pronged strategy for creating shareholder value. This involves the start of
production and cashflow, which will make Boss Australia’s next uranium producer, and growing
the uranium inventory, which will enable us to increase the mine life and production rates.” –
Boss MD Duncan Craib
Boss Energy Limited (ASX: BOE; OTCQX: BQSSF) is pleased to announce high-grade results from Resource
extension and infill drilling at the Gould’s Dam satellite deposit at its Honeymoon uranium project in South
Australia.
1
Refer to ASX: BOE announcement dated 25 February 2019. Refer Appendix 1 for Honeymoon JORC 2012 Resource.
FOR FURTHER INFORMATION PLEASE CONTACT:
Boss Energy Limited
ABN 38 116 834 336
Duncan Craib - Managing Director/ CEO
+61 (08) 6263 4494
ASX: BOE
OTCQX: BQSSF
Level 1, 420 Hay Street, Subiaco
Western Australia 6008
Paul Armstrong – Public Relations
+61 (08) 9388 1474
www.bossenergy.com
@Boss_Energy
Boss Managing Director Duncan Craib said: “These strong drilling results are in line with our strategy to
increase the inventory at Honeymoon. This will in turn enable us to grow the mine life and production rate,
increasing cashflow and leveraging our existing infrastructure.
“The results from new drill holes within the resource surpass our expectations in both grade and thickness
of the mineralisation. This is demonstrated by the exceptional results from WRM0013 including 5.25m
width @ 3,744ppm pU3O8 (19,658 GT).
“To put it into perspective, our cut-off grade is 250ppm and while we could mine at lower grades, there
are numerous cost and operational benefits to leaching higher grade material from continuous
thicknesses. Primarily, less ore has to be leached to extract the same amount of contained uranium, which
typically results in lower operating costs and increased operating margins.
“The data also enables us to improve our exploration models for the region and strongly suggests that
future exploration programs have the potential to add to the existing Mineral Resource”.
New Drill Intercepts
Drill hole WRM0013 was completed as a replacement for historic hole GLD004, which was drilled in 2004
but collapsed before any uranium grade data could be obtained. This hole produced exceptional results
with respect to both uranium grade and intercept thickness, with the following uranium mineralization
intercepts (PFN results, ppm pU3O8):
o 5.25m @ 3,744ppm pU3O8
GT 19,658
(WRM0013 from 102.5m)
➢ plus 3.25m @ 1,150ppm pU3O8
GT 3,737
(WRM0013 from 110.25m)
New drill hole WRM0020 was completed centrally between two historic holes GLD247 and GLD248 – both
of which were drilled in 2009 and spaced ~40m apart. The purpose of hole WRM0020 was to establish the
geological controls on mineralisation in these two historic holes, which returned very solid intercepts
including 2.50m @ 1,876ppm pU3O8 from 115.75m (GT 4,690 m.ppm, GLD247) and 3.50m @ 1,321ppm
pU3O8 from 110.50m (GT 4,624 m.ppm, GLD248). The results from WRM0020 also exceeded expectation,
with the following uranium mineralization intercepts (PFN results, ppm pU3O8):
o
2.75m @ 3,693ppm pU3O8
➢ plus 1.25m @ 2,277ppm pU3O8
GT 10,154
GT 2,847
(WRM0020 from 113.25m)
(WRM0020 from 117.75m)
Drill hole WRM0007 was also drilled as a replacement for historic hole GLD284, which was drilled in 2009
but due to technical issues at the time did not have any uranium grade data available. Hole WRM0007
produced several uranium intercepts, with the best result comprising (PFN results, ppm pU3O8):
o 4.25m @ 1,094ppm pU3O8
GT 4,651
(WRM0007 from 121.00m)
ASX: BOE
OTCQX: BQSSF
www.bossenergy.com
@Boss_Energy
Figure 1: Gould’s Dam drill campaign overview
Twin Hole Validation
Several twin drill holes from the current program have also produced excellent results.
Drill hole WRM0002 was completed as a twin of historic hole GLD007 (completed in 2004) in order to
obtain modern geophysical logs to help constrain the geological setting of the mineralization. The historic
hole identified significant uranium mineralization including 6.75m @ 2,314ppm pU3O8 from 112.00m (GT
15,620) and 4.75m @ 769ppm pU3O8 from 121.75m (GT 3,653). The results from twin hole WRM0002 –
drilled within ~7m of GLD007 – produced some exceptional uranium intercepts, including (PFN results,
ppm pU3O8):
o
4.25m @ 2,280ppm pU3O8
➢ plus; 4.50m @ 3,222ppm pU3O8
➢ plus; 4.25m @ 405ppm pU3O8
ASX: BOE
OTCQX: BQSSF
GT 9,688
GT 14,499
GT 1,722
www.bossenergy.com
(WRM0002 from 108.00m)
(WRM0002 from 114.25m)
(WRM0002 from 121.00m)
@Boss_Energy
Hole WRM0016 was drilled as a twin to historic hole BW 73, which was drilled in April 1975. Available
uranium equivalent grade data (derived from digitized paper logs of downhole gamma data) returned
3.60m @ 1,436ppm eU3O8 from 111.50m (GT 5,170). Hole WRM0016 was drilled within ~10m of the
historic collar, and despite being unable to acquire PFN data for this particular hole, the calibrated gamma
tool returned a very similar uranium intercept to that from BW 73. This important result suggests old drill
holes within the project area should provide a relatively reliable indication of likely uranium mineralization
present. Hole WRM0016 returned the following intercept (calibrated gamma result, ppm eU3O8):
o
3.25m @ 1,226ppm eU3O8
GT 3,985
(WRM0016 from 111.75m)
Figure 2: Exploration drilling on Gould’s Dam
Gould’s Dam Deposit
The Gould’s Dam deposit is located ~80km northwest of the Honeymoon Mine and currently contains a
JORC-compliant resource (Table 1) of 4.4Mt @ 650ppm U3O8 for 6.3Mlbs contained U3O8 (Indicated) and
17.7Mt @ 480ppm U3O8 for 18.7Mlbs contained U3O8 (Inferred).
The current drilling program at Gould’s Dam continues, with further twin/infill drilling planned within the
Indicated resource area, as well as investigative drilling of promising areas peripheral to the current
Indicated resource.
Once the current work at Gould’s Dam is completed, a resource infill drilling program will commence at
the Jason’s satellite deposit.
ASX: BOE
OTCQX: BQSSF
www.bossenergy.com
@Boss_Energy
Table 1: Summary of Mineral Resource for satellite deposit of Gould’s Dam
Resource
Classification
Tonnage
(Million Tonnes)
Average Grade
(ppm U3O8)
Contained Metal
(Kt, U3O8)
Contained Metal
(Mlb, U3O8)
Gould’s Dam (April 2016)2
Indicated
4.4
650
2.9
6.3
Inferred
17.7
480
8.5
18.7
About Boss Energy
Honeymoon is on track for first production in the December quarter, 2023. The mine is increasing the
production profile to 2.45 Mlb/annum over a plus-10 year mine life but utilising only 36Mlbs of the
Project’s global JORC Resource of 71.6Mlbs. This means there is substantial scope to extend the mine life
and increase the EFS production nameplate capacity of 2.45Mlb/annum from the remaining identified
JORC Resource. There are also significant resource growth opportunities from the Company’s satellite
deposits and significant defined Exploration Target3.
The Company anticipates the satellite resources to allow both an increase in the overall production profile
with minimal disturbance to operations and extend the mine life of the Honeymoon Project. Boss holds
high expectations that its exploration activities will continue to deliver increase Resources. The Company
has grown the global JORC resource from 16.6Mlbs to 71.6Mlbs (~331% increase) since acquiring
Honeymoon in December 2015.
This ASX announcement was approved and authorised by the Board of Boss Energy Limited.
For further information, contact:
Duncan Craib
Chief Executive Officer
P: +61 (8) 6263 4494
E: boss@bossenergy.com
For media enquiries, contact:
Paul Armstrong
Read Corporate
P: +61 (8) 9388 1474
E: info@readcorporate.com
2 Refer to ASX: BOE Announcement dated 8 April 2016
3 Refer ASX announcement dated 25 March 2019.
ASX: BOE
OTCQX: BQSSF
www.bossenergy.com
@Boss_Energy
Competent Person’s Statement
The information contained in this announcement that relates to exploration results is provided by Mr
Jason Cherry, who is a Member of the Australasian Institute of Geoscientists (AIG). Mr Cherry has
sufficient experience that is relevant to the style of mineralisation and type of deposit under
consideration, and to the activity being undertaken to qualify as a Competent Person, as defined in the
JORC 2012 edition of the “Australasian Code for Reporting of Mineral Resources and Ore Reserves”. Mr
Cherry has 17 years’ experience and is a full-time employee as Geology Manager for Boss Energy Ltd. Mr
Cherry consents to the inclusion in this report of the matters based on this information in the form and
context in which they appear.
Reference to previous ASX announcements
In relation to the results of the Feasibility Study announced 21 January 2020, the Company confirms that
all material assumptions underpinning the production target and forecast financial information included
in that announcement continue to apply and have not materially changed. Nothing in this announcement
pre-empts the findings of the Enhanced Feasibility Study currently being undertaken.
In relation to the Mineral Resource announced on 8 April 2016, 25 February 2019 and the Exploration
Targets announced on 25 March 2019, the Company confirms that it is not aware of any new information
or data that materially affects the information included in the original market announcement and that all
material assumptions and technical parameters underpinning the estimates in that market
announcement continue to apply and have not materially changed.
Forward-Looking Statements
This announcement includes forward-looking statements. These forward-looking statements are based
on the Company’s expectations and beliefs concerning future events. Forward-looking statements are
necessarily subject to risks, uncertainties, and other factors, many of which are outside the control of Boss
Energy, which could cause actual results to differ materially from such statements. Boss Energy makes no
undertaking to subsequently update or revise the forward-looking statements made in this
announcement, to reflect the circumstances or events after the date of this announcement.
ASX: BOE
OTCQX: BQSSF
www.bossenergy.com
@Boss_Energy
APPENDIX 1 – Historical Drill Results
In accordance with ASX Listing Rule 5.7.2, the Company provides the following information:
Table 1: Summary of historical drill holes listed within this report. All holes were drilled vertically
(-90˚ inclination and 0˚ azimuth).
Hole ID
GLD004
GLD007
GLD247
GLD248
GLD284
BW 73*
Easting
Northing
MGA94, z54
400040
6517440
400040
6517680
plus
plus
400003
6517883
plus
RL
(m)
79
78
EOH
(m)
76
137
77
144
400041
77
144
400078
400037
6517885
plus
6517560
6517332
plus
GT
To
Width
pU3O8
(m.ppm)
(m)
(m)
(ppm)
Hole collapsed, could not be logged
809
106.50
109.25
2.75
294
15,620
112.00
118.75
6.75
2,314
3,653
121.75
126.50
4.75
769
1,467
109.50
112.50
3.00
489
4,690
115.75
118.25
2.50
1,876
4,624
110.50
114.00
3.50
1,321
From
(m)
117.75
78
78
138
130.5
105.24
111.54
119.00
1.25
491
No uranium grade data available
108.44
3.20
345
115.14
3.60
1,436
614
1,104
5,170
Historical eU3O8 grade data derived for hole BW 73 from calibrated gamma tool data sampled historically
at the time of drilling these holes. All other results reported as PFN-derived pU3O8.
Values are reported above the nominal 250ppm eU3O8 cutoff grade, 0.5m minimum interval thickness and
maximum 1m internal dilution.
Table 2: Summary of results to date from the Gould’s Dam drilling program. All holes were drilled
vertically (-90˚ inclination and 0˚ azimuth).
Northing
RL
EOH
From
MGA94, z54
399,965 6,517,682
(m)
77.4
(m)
137
(m)
400,037
6,517,674
plus
plus
77.8
138
WRM0003
400,097
6,517,679
plus
plus
77.7
132
WRM0004
400,120
78.4
133
WRM0005
400,081
6,517,639
plus
6,517,639
108.00
114.25
121.00
108.00
112.00
120.50
104.75
115.75
78.3
133
78.4
139
Hole ID
WRM0001
WRM0002
WRM0006
ASX: BOE
Easting
400,072
OTCQX: BQSSF
plus
plus
plus
6,517,602
plus
plus
To
Width
pU3O8
Grade
Thickness
(m)
(m)
(ppm)
(m.ppm)
Hole collapsed - no logs obtained
112.25
4.25
2,280
9,688
118.75
4.50
3,222
14,499
125.25
4.25
405
1,722
108.75
0.75
691
518
114.25
2.25
891
2,004
127.50
7.00
686
4,802
107.00
2.25
424
954
116.50
0.75
1,766
1,325
105.25
109.50
113.25
125.50
106.75
110.00
108.75
111.75
114.50
127.50
108.50
116.25
3.50
2.25
1.25
2.00
1.75
6.25
299
707
1,357
1,006
612
738
1,048
1,592
1,696
2,012
1,070
4,614
120.00
124.50
4.50
843
3,794
www.bossenergy.com
@Boss_Energy
Hole ID
WRM0007
WRM0008
WRM0009
WRM0010
WRM0011
WRM0012
Northing
RL
EOH
From
To
Width
pU3O8
Grade
Thickness
MGA94, z54
400,083 6,517,560
plus
plus
plus
plus
400,069 6,517,523
plus
plus
400,005 6,517,559
plus
400,033 6,517,523
plus
plus
400,034 6,517,480
plus
plus
400,083 6,517,438
(m)
78.6
(m)
139
(m)
108.50
110.75
114.25
117.75
(m)
109.00
112.50
116.50
119.75
(m)
0.50
1.75
2.25
2.00
(ppm)
1,321
902
401
977
(m.ppm)
661
1,579
902
1,954
121.00
104.00
109.00
115.75
111.50
116.50
103.25
109.75
115.75
103.75
110.25
115.00
125.25
107.50
112.25
119.50
112.50
119.75
107.25
110.50
116.50
107.75
113.75
116.00
4.25
3.50
3.25
3.75
1.00
3.25
4.00
0.75
0.75
4.00
3.50
1.00
1,094
367
1,140
511
497
455
498
1,232
801
622
924
2,198
4,651
1,285
3,704
1,915
497
1,478
1,992
924
601
2,488
3,232
2,198
103.50
111.00
114.25
102.50
110.25
116.50
104.50
111.75
115.00
107.75
113.50
117.50
1.00
0.75
0.75
5.25
3.25
1.00
651
1,317
1,048
3,744
1,150
589
651
987
786
19,658
3,737
589
104.25
111.75
103.00
110.00
104.12
111.75
108.25
110.50
103.25
112.75
114.50
108.50
113.25
117.75
112.50
106.25
114.25
105.75
111.00
107.14
115.00
109.00
111.75
105.50
114.50
115.75
110.75
116.00
119.00
114.25
2.00
2.50
2.75
1.00
3.02
3.25
0.75
1.25
2.25
1.75
1.25
2.25
2.75
1.25
1.75
598
904
610
1,920
715
1,290
1,012
2,343
635
819
391
477
3,693
2,277
1,752
1,196
2,259
1,677
1,920
2,160
4,192
759
2,928
1,428
1,433
489
1,072
10,154
2,847
3,066
Easting
WRM0013
400,043
WRM0014
400,082
WRM0015
400,083
WRM0016
400,040
WRM0017
400,035
WRM0018
400,089
WRM0019
WRM0020
399,918
400,023
WRM0021
400,000
78.5
133
79.1
132
77.8
133
78.6
133
78.1
133
79.0
133
79.4
133
78.6
127
80.0
127
6,517,361
plus
6,517,364
plus
80.1
127
78.3
127
6,517,641
6,517,884
plus
plus
6,517,923
77.2
76.8
133
133
76.7
133
plus
plus
6,517,440
plus
plus
6,517,203
plus
6,517,331
plus
6,517,330
plus
Drill holes WRM0016, WRM0017 & WRM0018 could not be logged with the PFN tool and are therefore
reported as calibrated gamma derived equivalent U3O8 (eU3O8).
Results for all other holes are derived from calibrated Prompt Fission Neutron (PFN) tools (pU3O8).
Values are reported above the nominal 250ppm pU3O8 cutoff grade, 0.5m minimum interval thickness
and maximum 1m internal dilution.
ASX: BOE
OTCQX: BQSSF
www.bossenergy.com
@Boss_Energy
JORC Code, 2012 Edition – Table 1
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria
JORC Code explanation
Commentary
Sampling
techniques
• Nature and quality of sampling (eg cut channels, random chips, or
specific specialised industry standard measurement tools appropriate
to the minerals under investigation, such as down hole gamma
sondes, or handheld XRF instruments, etc). These examples should
not be taken as limiting the broad meaning of sampling.
• Include reference to measures taken to ensure sample representivity
and the appropriate calibration of any measurement tools or systems
used.
• Aspects of the determination of mineralisation that are Material to
the Public Report.
• In cases where ‘industry standard’ work has been done this would be
relatively simple (eg ‘reverse circulation drilling was used to obtain 1
m samples from which 3 kg was pulverised to produce a 30 g charge
for fire assay’). In other cases more explanation may be required,
such as where there is coarse gold that has inherent sampling
problems. Unusual commodities or mineralisation types (eg
submarine nodules) may warrant disclosure of detailed information.
• Drill type (eg core, reverse circulation, open-hole hammer, rotary air
blast, auger, Bangka, sonic, etc) and details (eg core diameter, triple
or standard tube, depth of diamond tails, face-sampling bit or other
type, whether core is oriented and if so, by what method, etc).
• The latest WRM series drill holes have been geophysically logged
upon completion with a combination of Prompt Fission Neutron
(PFN), Borehole Magnetic Resonance (BMR), calibrated natural
gamma, neutron porosity, formation density, induction and
magnetic deviation tools. Data is collected at 1cm intervals and
incorporated in the Boss Energy drilling database. All gamma and
PFN tools used were calibrated at the PIRSA calibration facility in
Adelaide by both Boss Energy and logging contractor Borehole
Wireline prior to the program commencing.
• Historic drilling from 2004 & 2009 was logged with calibrated PFN
and natural gamma tools.
• Given the historic nature of drilling from the 1970’s, it is not possible
to comment on the accuracy or quality of any calibration systems or
methods used to produce the historical results.
• Method of recording and assessing core and chip sample recoveries
and results assessed.
• Measures taken to maximise sample recovery and ensure
• Drill chips were collected for geological logging purposes only, with
good to very good sample recoveries.
Drilling
techniques
Drill sample
recovery
ASX: BOE
OTCQX: BQSSF
• The drilling technique used for all holes was the Rotary Mud, with
the 2023 drilling completed by highly experienced contractor
Watson Drilling. Drill cuttings were collected at 1m intervals for
geological logging.
www.bossenergy.com
@Boss_Energy
Criteria
JORC Code explanation
•
Logging
•
•
Sub-sampling
techniques
and sample
preparation
•
•
•
•
•
•
•
Quality of
assay data
and
laboratory
tests
ASX: BOE
•
•
Commentary
representative nature of the samples.
Whether a relationship exists between sample recovery and grade
and whether sample bias may have occurred due to preferential
loss/gain of fine/coarse material.
Whether core and chip samples have been geologically and
geotechnically logged to a level of detail to support appropriate
Mineral Resource estimation, mining studies and metallurgical
studies.
Whether logging is qualitative or quantitative in nature. Core (or
costean, channel, etc) photography.
The total length and percentage of the relevant intersections logged.
If core, whether cut or sawn and whether quarter, half or all core
taken.
If non-core, whether riffled, tube sampled, rotary split, etc and
whether sampled wet or dry.
For all sample types, the nature, quality and appropriateness of the
sample preparation technique.
Quality control procedures adopted for all sub-sampling stages to
maximise representivity of samples.
Measures taken to ensure that the sampling is representative of the
in situ material collected, including for instance results for field
duplicate/second-half sampling.
Whether sample sizes are appropriate to the grain size of the
material being sampled.
The nature, quality and appropriateness of the assaying and
laboratory procedures used and whether the technique is considered
partial or total.
For geophysical tools, spectrometers, handheld XRF instruments, etc,
the parameters used in determining the analysis including instrument
make and model, reading times, calibrations factors applied and
OTCQX: BQSSF
• All WRM series drill holes have been geologically logged and
incorporated into the Boss Energy database.
•
The PFN tool has a depth of investigation radius of approximately
25-40 cm around the borehole. This provides an accurate
measurement of epithermal/thermal neutron ratios for the
calculation of pU3O8.
• No assay sampling was carried out for the drill holes in question.
• All PFN and gamma tools being used as part of the current drilling
campaign have been calibrated at the PIRSA calibration facility in
Adelaide by both Boss Energy and logging contractor Borehole
Wireline prior to the program commencing.
www.bossenergy.com
@Boss_Energy
Criteria
•
Verification
of sampling
and assaying
•
•
•
•
Location of
data points
Data spacing
and
distribution
JORC Code explanation
Commentary
their derivation, etc.
Nature of quality control procedures adopted (eg standards, blanks,
duplicates, external laboratory checks) and whether acceptable levels
of accuracy (ie lack of bias) and precision have been established.
The verification of significant intersections by either independent or
alternative company personnel.
The use of twinned holes.
Documentation of primary data, data entry procedures, data
verification, data storage (physical and electronic) protocols.
Discuss any adjustment to assay data.
• A number of twin holes are being drilled as part of the current
campaign. The PFN and calibrated gamma results from this drilling
will be used to verify previous PFN results and also to verify/upgrade
the historic gamma logging from the 1970’s/1980’s.
• Natural gamma logs are used to depth match all geophysical tool
runs to ensure accuracy.
• Accuracy and quality of surveys used to locate drill holes (collar and
down-hole surveys), trenches, mine workings and other locations
used in Mineral Resource estimation.
• Specification of the grid system used.
• Quality and adequacy of topographic control.
• Data spacing for reporting of Exploration Results.
• Whether the data spacing and distribution is sufficient to establish
the degree of geological and grade continuity appropriate for the
Mineral Resource and Ore Reserve estimation procedure(s) and
classifications applied.
• Whether sample compositing has been applied.
Orientation of • Whether the orientation of sampling achieves unbiased sampling of
data in
possible structures and the extent to which this is known, considering
relation to
the deposit type.
geological
• If the relationship between the drilling orientation and the
structure
orientation of key mineralised structures is considered to have
ASX: BOE
OTCQX: BQSSF
• The current WRM series drill holes have been pegged using a Trimble
TDC600 high accuracy DGPS with a nominal accuracy of ~0.1m.
Coordinates are cited in MGA94 grid, z54.
• The Competent Person has reviewed all available data and, based on
their knowledge and experience with the various exploration
techniques employed, is satisfied that the historical drilling data
included here is of sufficient quality and accuracy to provide a
reasonable, if indicative, basis for the mineralisation reported herein.
• The current WRM series drill hole spacing ranges from 40m to
~200m within the Indicated portion of the deposit.
• All PFN and gamma-derived eU3O8 data (both new and historic) has
been composited to 25cm intervals.
• All new & historical holes were drilled vertically which provides an
accurate intersection of the flat laying mineralised bodies.
www.bossenergy.com
@Boss_Energy
Criteria
Sample
security
Audits or
reviews
ASX: BOE
JORC Code explanation
Commentary
introduced a sampling bias, this should be assessed and reported if
material.
• The measures taken to ensure sample security.
• The results of any audits or reviews of sampling techniques and data.
OTCQX: BQSSF
•
All new data from the current campaign is processed and verified
on site and then incorporated directly into the Boss Energy
database.
• All information and data used in this report have been reviewed by
the Boss Energy Competent Person. Multiple PFN tools are being run
on several of the new WRM series holes for validation and
comparison purposes.
www.bossenergy.com
@Boss_Energy
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria
Mineral
tenement and
land tenure
status
JORC Code explanation
•
•
Exploration
done by other
parties
•
Geology
•
Commentary
Type, reference name/number, location and ownership
including agreements or material issues with third parties
such as joint ventures, partnerships, overriding royalties,
native title interests, historical sites, wilderness or national
park and environmental settings.
The security of the tenure held at the time of reporting along
with any known impediments to obtaining a licence to
operate in the area.
Acknowledgment and appraisal of exploration by other
parties.
• The Project consists of 1 granted Mining Lease, 5 granted
Exploration Licenses, 3 Retention Leases and 2 Miscellaneous
Purpose Licenses.
Deposit type, geological setting and style of mineralisation.
Palaeovalley-type, sand-hosted, tabular style uranium of the
following model:
• The Gould’s Dam region and surrounding areas of the Billeroo
and Curnamona Palaeovalley’s have been systematically
explored and drilled starting from 1969.
•
•
•
•
ASX: BOE
OTCQX: BQSSF
Narrower, mineralised, palaeochannels within a broader
palaeovalley system,
Underlying basement faults reactivated sporadically, greatly
influencing the shape and formation of the overlying fluvial
system, creating uplifted ridges of basement and the
meandering narrow palaeochannels described above;
REDOX interfaces from the vertical and lateral movement of
uraniferous (oxidised) fluids from south (granitic source rocks in
the Olary Ranges) to north (towards Lake Frome);
Organic/sulphide-rich horizons and possible hydrocarbon fluids,
the latter seeping upwards along the basement faults. Organicand sulphide-rich material formed within shallow channel
embankments and ledges.
www.bossenergy.com
@Boss_Energy
Criteria
Drill hole
Information
JORC Code explanation
•
•
Data
aggregation
methods
•
•
•
ASX: BOE
A summary of all information material to the understanding
of the exploration results including a tabulation of the
following information for all Material drill holes:
o easting and northing of the drill hole collar
o elevation or RL (Reduced Level – elevation above sea level
in metres) of the drill hole collar
o dip and azimuth of the hole
o down hole length and interception depth
o hole length.
If the exclusion of this information is justified on the basis that
the information is not Material and this exclusion does not
detract from the understanding of the report, the Competent
Person should clearly explain why this is the case.
In reporting Exploration Results, weighting averaging
techniques, maximum and/or minimum grade truncations (eg
cutting of high grades) and cut-off grades are usually Material
and should be stated.
Where aggregate intercepts incorporate short lengths of high
grade results and longer lengths of low grade results, the
procedure used for such aggregation should be stated and
some typical examples of such aggregations should be shown in
detail.
The assumptions used for any reporting of metal equivalent
values should be clearly stated.
OTCQX: BQSSF
Commentary
•
Please refer to Appendix 1, Table 1 for drill collar information.
•
Mineralised intervals were chosen based upon a nominal
250ppm U3O8 cutoff, 0.50 m minimum interval thickness and
maximum 1m internal dilution for reporting. Where available,
Prompt Fission Neutron (PFN) data is used which is designated
pU3O8. For historical drilling or in instances during modern
drilling where the PFN tool data was unavailable, gamma toll
derived data is used which is designated eU3O8 and may be
affected by radiometric disequilibrium.
www.bossenergy.com
@Boss_Energy
Criteria
JORC Code explanation
Relationship
between
mineralisation
widths and
intercept
lengths
• These relationships are particularly important in the reporting
of Exploration Results.
• If the geometry of the mineralisation with respect to the drill
hole angle is known, its nature should be reported.
• If it is not known and only the down hole lengths are reported,
there should be a clear statement to this effect (eg ‘down hole
length, true width not known’).
• Appropriate maps and sections (with scales) and tabulations of
intercepts should be included for any significant discovery being
reported These should include, but not be limited to a plan view
of drill hole collar locations and appropriate sectional views.
• Where comprehensive reporting of all Exploration Results is not
practicable, representative reporting of both low and high
grades and/or widths should be practiced to avoid mislead
Share your feedback
Discover